Anyone who has a house knows how important vacuums are. They help keep the floors clean and free of dirt, dust, and pet hair. But sometimes, even a good vacuum can have problems. The following are four common vacuum problems and how to fix them so that you can get your vacuum back up and running in no time. After trying to repair your vacuum, if it still doesn’t work, it might be time to purchase a new vacuum.
2- Your Vacuum is Hard to Push
This may be one of the most common vacuum problems. If you find that your vacuum is hard to push or have trouble picking up dirt, it could mean a few things. First, small pieces of debris stuck in between the motor and fan blades can make it harder for air to pass through. This will make the vacuum work harder and can cause it to overheat.
Second, if the suction is too strong, it can actually lift the carpet or flooring and create a seal that makes it hard for air to escape. In either case, you can try cleaning the blades or adjusting the suction strength to see if that helps. You could also check the belt to see if it’s loose or broken. Adjusting that might make your vacuum run smoother and easier for you to use.
If none of these solutions work, you may have a motor problem. This is often due to overheating, so make sure you keep an eye on your vacuum cleaner while using it and take a break if it starts to get too hot.
2- Your Vacuum is Making a Loud Noise
If your vacuum is making a loud noise, it could be because of a few things. One possibility is that there’s something caught in the fan or motor. You can try cleaning it out to see if that fixes the problem.
Another cause might be that the belt has broken or come loose. If this is the case, you can replace the belt fairly easily. Another possibility is that there’s something wrong with the motor. If this is the problem, it will likely need to be replaced.
3- Your Vacuum is Leaking
If your vacuum starts to leak, you may need to replace the seal or gaskets. This can be done fairly easily in most cases and will take care of any leaks that might be occurring.
This should not be confused with if there’s a crack in the tank where it holds the dirt, though. If this is the case, you will need to replace the tank. Replacing parts on your vacuum is not always as daunting as it may seem. In most cases, it can be done fairly easily and with just a few basic tools.
4- Your Vacuum Won’t Turn On
If your vacuum doesn’t turn on, there may be a few things that could cause this. If you are using a corded vacuum and the plug has come loose or become damaged, it might need to be replaced. This should not happen with most quality vacuums, though.
A more likely possibility is that the motor has stopped working. In this case, it will likely need to be replaced. If you have a battery-operated vacuum and the battery is dead, you can try charging it or replacing the battery. This should fix the problem.
If none of these solutions work, you may have a more serious issue on your hands, and it would be best to contact an expert for help with this. If you are not sure who to call, try checking online or looking in your local phone book.
